35
35
Toggle Mode
Toggle Mode configures a controller mapping to toggle the “To” value between 0 and 127
each time the “From” value transmits a value of 127. This feature allows you to assign MIDI
foot switches to features on the instrument like an organ’s rotary speed: Step on the pedal
once to slow the rotors down and step again to speed them up.
Toggle mode is configured with a starting value. When the MIDI configuration is applied on
scene change, the initial state of the toggle is sent to the instrument. (Init Off) means the
instrument controller value is initialized to 0. (Init On) means it is initialized to 127.
Saving and Loading MIDI Configurations
MIDI Configurations are assigned to an Instrument Module, but some settings can be saved
and reloaded from a file.
Press [Save] to save a configuration. This includes for each MIDI input:
Key Range
Transpose
Channel remap
Controller remap
This allows frequently used MIDI configuration parameters to be applied to other Instrument
Modules or stored for future use.
When a MIDI Configuration is loaded you may optionally load or ignore specific portions of
the configuration.
NOTE: Each MIDI Configuration file stores information about a single MIDI port. If you save
a file, it will reflect the configuration of the currently selected port (if a channel from/to pair is
selected beneath it, it will still save the parent port info.) When you load a MIDI Configuration
Load MIDI Configuration
Save MIDI Configuration
Assign default MIDI Configuration
