My current setup is:
Two M-Audio ES88 midi controllers (ES88 midi out jacks going to midi in on sound cards; not using M-Audio USB midi drivers due to problems with the same driver name being assigned to two midi ins..)
Core2Duo E6600 at stock clock (no overclock)
Windows 7 64-bit
Three sound cards: RME Hammerfall HPSDe AIO (PCIe card), M-Audio 2496, and EMU0404.
I started forte and selected the EMU as the main ASIO sound device. Then I restarted forte. Then I loaded a rack where the RME had previously been the ASIO sound card, so the busses were all routed to RME outputs. When the rack loaded, there was no sound. When I played the midi keyboards, there was no indication of audio being generated by the VSTi's looking at forte's VU meter. The VU meter was just dark. Then I noticed that although I had selected the EMU as the ASIO device in the Options menu, the outputs for the busses was still the RME card. When I click on the bus to change the output routing, it does not offer the EMU as an option. It only shows the RME outputs as options.
Any ideas? I wonder if it's related at all to the runt issue that was solved, though I have no reason to think that other than both problems sort of happen at rack loading time, and seem to be related to changing HW.
Post here if you are having a problem with or a question about forte that is not about a plugin or audio/MIDI hardware.
1 post • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests