Postby evilantal » Tue Aug 11, 2015 2:30 am
I have used a metronome live on stage with forte before.
My problem, then, was that EHCo's MIDI clock out didn't work correctly in my setup. I ended up using a quite complex method of running REAPER outside of forte with different songs/tempos on each tab and switching between those tabs by sending program changes to REAPER through EHCo.
I think EHCo was updated later to correct the issue I had.
What you could probably use is a VST that generates it's own click audio (instead of just MIDI) and route that to a different forte bus that outputs to a different set of ASIO outputs than your main sound.
You could look at:
Sonic Assault Tap!
Or hosting an instrument that produces the click in the VST version of energyXT which in turn is hosted in forte.
Lenovo Z500, quad core i7 3632QM, 16GB 1600MHz DDR3, RME BabyFace, Samsung EVO SSD x2, forte 4, Kawai ES100, Kurzweil PC2, VB3, Alchemy, Kontakt 5, Omnisphere 2, Diva, ZebraHZ, Bazille, Pianoteq 5 Standard, Falcon, various effects