Search found 63 matches

by bcslaam
Mon Feb 08, 2010 12:42 am
Forum: Forte and EHCo
Topic: Using plugins with multiple outputs
Replies: 12
Views: 2685

Re: Using plugins with multiple outputs

Actually I think the current UI is very suitable!

Just have a new module type, an input module for the VSTi multi out. Then you can assign its own bus out, add fx etc. It should just come up as a sublist of an audio input module, like it is done in VEPro (list only).
by bcslaam
Mon May 11, 2009 4:33 am
Forum: Forte and EHCo
Topic: Problems with NI synths
Replies: 8
Views: 2441

Re: Problems with NI synths in 2054

I'm still getting crashes from Massive and bad preset loading in Massive and FM8 even after re-install.

Anyone else having these issues
by bcslaam
Sun Apr 05, 2009 10:34 pm
Forum: Forte and EHCo
Topic: Main Bus Overload
Replies: 5
Views: 1394

Re: Main Bus Overload

Hi vince66 I also get both the problems you mention. 1. z3ta v1.5x has been very problematic for me. Causing crashes when loading old sounds, muting it's output (often solved by disabling the limiter!), bad quality settings from older sounds. It's a shame because it's a very useful synth that should...
by bcslaam
Mon Mar 02, 2009 4:32 am
Forum: Forte and EHCo
Topic: Notes sticking, MIDI hang.
Replies: 8
Views: 2245

Re: Notes sticking, MIDI hang.

I have this problem as well. It seemed to improve when I changed my midi interface from midisport 2x2 usb to the inbuilt port on the motu traveller (firewire). But it still happens. It happens less when remove usb devices such as touchscreen, mouse, thumbdrive. However I dont see this as a permanent...
by bcslaam
Mon Mar 02, 2009 4:19 am
Forum: Forte and EHCo
Topic: Problems with NI synths
Replies: 8
Views: 2441

Re: Problems with NI synths in 2054

Thanks for replies. I just got back from a short tour. I will get the info you require ASAP. Thanks Angel. I am trimming and saving after every small change just for safe measure. I reload every so often too. The problem is when the "massive gave wrong save size..." error comes up its when...
by bcslaam
Wed Feb 25, 2009 11:31 pm
Forum: Forte and EHCo
Topic: Problems with NI synths
Replies: 8
Views: 2441

Re: Problems with NI synths in 2054

Thanks for the quick reply Mike. I was experiencing the crashing problem in 2053. I'm about to leave on a tour though and troubleshooting is not possible til monday or tuesday. In fact the Massive causing crashes from selecting presets problem hasn't occured since I went from 2053 to 2054. What is a...
by bcslaam
Wed Feb 25, 2009 9:18 pm
Forum: Forte and EHCo
Topic: Problems with NI synths
Replies: 8
Views: 2441

Problems with NI synths

Hi Has anyone else being experiencing problems with NI Massive, Absynth, Pro-53 and FM8? I have had crashes and corruption caused by Massive reporting the wrong save size when I go to update a scene. This then corrupts the scene and data loss occurs. It does seem to be something with the .ksd format...
by bcslaam
Tue Aug 12, 2008 2:47 am
Forum: Forte and EHCo
Topic: Slow load times.
Replies: 19
Views: 5307

Re: Slow load times.

Cool.

I've also been taken off the beta list. Can you please put me back on Mike?
by bcslaam
Mon Jun 02, 2008 11:51 pm
Forum: Forte and EHCo
Topic: Pops Clicks and short audio dropouts
Replies: 4
Views: 1803

by bcslaam
Mon Jan 14, 2008 9:23 pm
Forum: Forte and EHCo
Topic: Stuck ON notes make FORTE unusable as a live tool for me.
Replies: 13
Views: 5257

I also have stuck notes, they are frequent enough to be a PITA. Stressful and embarrassing live. I use a midisport usb to midi interface that goes to my controllers using 5pin midi. I have 2, sometimes 3 midi sources so the 1 input on my m-audio 410 is not enough. I have tried using a little merge b...
by bcslaam
Mon Jan 14, 2008 9:04 pm
Forum: Forte and EHCo
Topic: Vsampler - Discontinued ?
Replies: 1
Views: 1451

by bcslaam
Sun May 06, 2007 10:26 am
Forum: Plugin Issues
Topic: How to setup a Vocoder VSTi with midi pitch control
Replies: 1
Views: 2452

How to setup a Vocoder VSTi with midi pitch control

I am able to get vocoder working as an unchanging chord or note using it's in built synth. But how do I set one up so I can play the notes on a keyboard? I cant seem to get midi note information to any of the onboard synths in vocoders like Orange Vocoder, Vintage Vocoder. The only solution I see is...
by bcslaam
Sun May 06, 2007 10:10 am
Forum: Forte and EHCo
Topic: How do I change a song scene above #128
Replies: 1
Views: 1483

How do I change a song scene above #128

Hi I need to have a choice of over 50 songs in a set list. Each with anywhere from 3 to 10 scenes within. My "program" numbers have already reached the 280 mark. Remotely, without laboriously paging thru scenes after 128 with a "next scene" controlled command, how do I directly a...
by bcslaam
Thu Apr 19, 2007 12:21 am
Forum: Plugin Issues
Topic: Crashing with wusikstation
Replies: 2
Views: 2518

Solved it! It was hyperthreading. And instead of disabling it, and taking a slight multitasking hit , I used your nifty "Use all available CPUs" switch to save the day...or should I say days. Request: A "disable hyperthreading but keep multiple CPUs" switch would be good in an up...
by bcslaam
Wed Apr 18, 2007 1:59 am
Forum: Plugin Issues
Topic: Crashing with wusikstation
Replies: 2
Views: 2518

Crashing with wusikstation

Hi I have been getting continual crashing in Forte 1.6.96 (and v1.6.94). Its a very hard bug to catch. It's intermittent and happens to scenes and sounds that previously were active without crashing. I'm hoping Brainspawn and Wusikstation will look at it. Please go to this thread for full details. h...
by bcslaam
Fri Jan 12, 2007 9:42 pm
Forum: Forte and EHCo
Topic: MIDI Routing CC to PC Question
Replies: 4
Views: 2679

by bcslaam
Thu Dec 28, 2006 10:45 pm
Forum: Forte and EHCo
Topic: Proposed change in functionality - feedback requested
Replies: 8
Views: 4411

I frequently change midi setups. Sometimes I program racks for clients or move from a studio rig to a lappy with various midi interfaces. If a rack can be adapted to each interface with such a mapping feaure and still retain all settings, mappings etc for the mapped ports then this sounds like a goo...
by bcslaam
Mon Oct 16, 2006 9:30 pm
Forum: Forte and EHCo
Topic: Same Midi channel in different zones
Replies: 1
Views: 1526

Same Midi channel in different zones

by bcslaam
Sun Sep 10, 2006 7:49 am
Forum: Forte and EHCo
Topic: Do you use different tempo and transport automation per scen
Replies: 8
Views: 4189

by bcslaam
Mon Aug 14, 2006 10:38 pm
Forum: Forte and EHCo
Topic: Forte and Novation's Automapping function..
Replies: 5
Views: 2770

I think support for automap would be really cool. I'm putting it on the wishlist. Please chime in there if you agree.
by bcslaam
Wed May 10, 2006 2:35 pm
Forum: Forte and EHCo
Topic: Will Echo become redundant
Replies: 2
Views: 1837

Also We still need to be able to send controller info to internal VSTs that are blocked from changing with scenes. eg Kontakt I dont think EHco can do this. Will it be possible? I must admit I thought a 70 dollar price tag would provide a few more features than what eventuated. At least to solve thi...
by bcslaam
Wed May 10, 2006 2:20 pm
Forum: Forte and EHCo
Topic: Will Echo become redundant
Replies: 2
Views: 1837

Will Echo become redundant

I'm hangin to know if the features of the brainspawn echo plugin will be integrated into 1.6. And if so will there be a different upgrade path.
by bcslaam
Tue May 09, 2006 10:37 pm
Forum: Forte and EHCo
Topic: Presets inconsistant when using 2 instances
Replies: 2
Views: 1510

Presets inconsistant when using 2 instances

Hi I'm having problems with my rack. I run 2 instances of z3ta and 2 of korg legacy plus others on a lappy with XP sp2 and 2gig of ram and echo indigo. With both of these I plugins (seems any multiple instance of any plugin), if in a scene I work on a sound and save as a user preset in forte's list ...
by bcslaam
Thu Mar 30, 2006 10:03 pm
Forum: Forte and EHCo
Topic: Multiclient MIDI driver
Replies: 1
Views: 1223

Multiclient MIDI driver

Hi I have set up a client to run a midi/audio playback application simultaneously with forte using midiyoke. This is working great for him now but we have introduced a uc33 midi controller into the equation. I want it to only control stuff in forte but sometimes the other app will grab it from forte...
by bcslaam
Mon Jan 30, 2006 6:27 am
Forum: Forte and EHCo
Topic: This Rack still clicks and pops
Replies: 3
Views: 1972

Hi
I have solved the dropouts during scene change. That was my fault. Some plugins in the chain were going from bypassed to not.

Still remains is the clicking and popping every now and then.
by bcslaam
Sun Jan 29, 2006 2:24 pm
Forum: Forte and EHCo
Topic: can anyone recommend a really good MIDI controller keyboard?
Replies: 13
Views: 6319

Very interesting The main reasons I got the vmk was its VERY short depth (under 2" above keys! like the doepfer), its weight and FOUR foot pedal inputs and of coarse 88 semi-weighted notes. Were there any keyboards at namm that had similar characteristics? VMK is an ideal 88 semi for air travel. I c...
by bcslaam
Sun Jan 29, 2006 1:50 am
Forum: Forte and EHCo
Topic: This Rack still clicks and pops
Replies: 3
Views: 1972

This Rack still clicks and pops

Hi Dirk and Brainspawn I just cant seem to find the reason why this rack still clicks and pops every now and then. Maybe every minute or every 5min. Sometimes more often. Seems to help to increase priority in task manager to realtime or high but it doesnt stop. My suspicion is the aux modules but I'...
by bcslaam
Mon Jan 23, 2006 10:09 am
Forum: Forte and EHCo
Topic: can anyone recommend a really good MIDI controller keyboard?
Replies: 13
Views: 6319

hi busybox sorry for the late reply been really busy! The keys trigger 8mm down. They have another 2mm to go before you can feel the aftertouch kik in. How does this rate for you? I'd be interested to know. My K2500 triggers at 10mm down. Be sure that you are looking at the Vmk88 and not the Tmk88. ...
by bcslaam
Mon Jan 23, 2006 7:09 am
Forum: Forte and EHCo
Topic: New Fader Plugin
Replies: 1
Views: 1369

New Fader Plugin

Hi I just wanted to mention that Dirk has created a new fader vst plugin that is far more useful than the Brainspawn Automated fader dx plugin (much respect to Brainspawn however). Can be found at http://www.solidsoundstudio.net/html/basic_strip.html Features: * Logaritmic tapered level fader with n...
by bcslaam
Wed Jan 18, 2006 7:16 am
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

Dirk your help is much appreciated. I hope that in the spirit of open source and for the benfit of forte someone (if you understandably can't) will give us a more featured fader plugin. I will have to test without aux plugins etc to see what cures the scene change glitch problem. Hard to do on paid ...
by bcslaam
Wed Jan 18, 2006 12:24 am
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

I have the backing track coming in an audio input channel that has autofader and 3 aux sends. Evertime I change a scene mid song there is a glitch in the audio. Is there any way to stop this? Which plugin/module is the culprit? Can I mod the ini files to solve this? Dirk How do you have your backing...
by bcslaam
Tue Jan 17, 2006 9:53 pm
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

by bcslaam
Tue Jan 17, 2006 9:50 pm
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

by bcslaam
Tue Jan 17, 2006 9:37 pm
Forum: Forte and EHCo
Topic: Another ini mod Question
Replies: 2
Views: 1794

Another ini mod Question

by bcslaam
Tue Jan 17, 2006 9:14 pm
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

by bcslaam
Sun Jan 15, 2006 9:01 pm
Forum: Forte and EHCo
Topic: Playing loops
Replies: 5
Views: 2596

by bcslaam
Sun Jan 15, 2006 4:50 am
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

Hi ghead Yes it is a VST plugin. And a good one at that. I could only find find GEQs. 1. Anwida GEQ31V. Great. This was my end choice. Seemed the biggest company (more likelyhood of staying afloat and supporting the GEQ). And it sold the GEQ31V for $59. http://www.anwida.com 2. DiscoDSP seemed alrig...
by bcslaam
Fri Jan 13, 2006 10:37 pm
Forum: Forte and EHCo
Topic: BSOD When Saving Rack
Replies: 7
Views: 2939

Hi Dirk We went down to the store and got 2GB of RAM. This solved the BSODs. And the load time was improved tenfold. Still, when I had only 1 scene with the same rack, the loading/saving time was a lot faster. It seems when Forte has to use a page file a lot it becomes unstable. Can someone comment ...
by bcslaam
Fri Jan 13, 2006 1:01 am
Forum: Forte and EHCo
Topic: BSOD When Saving Rack
Replies: 7
Views: 2939

Hi last reply was before I saw yours. Thanks for quick support. I created one main default scene and copied it to create the other 60 scenes. I havent started tailoring them yet, so there isn't any differences between scenes yet. But there will be. Just differences such as different Voxformer preset...
by bcslaam
Fri Jan 13, 2006 12:50 am
Forum: Forte and EHCo
Topic: BSOD When Saving Rack
Replies: 7
Views: 2939

PANIC This takes way too long to save, load, turn power on/off. About 4 to 5mins each way!! I have no VSTi loaded, only FX and audio inputs with 61 scenes. Plugins used Voxengo Voxformer on 5 channels 8 aux sends on 8 ch 5 autofaders 1 Glaceverb on buss 1 Electrolux LM multiFX on buss 1 Voxengo Temp...
by bcslaam
Fri Jan 13, 2006 12:01 am
Forum: Forte and EHCo
Topic: BSOD When Saving Rack
Replies: 7
Views: 2939

BSOD When Saving Rack

Hi After taking litterally 5minutes to save my rack file at the very end it totally crashed the laptop and it reboots. This is REALLY alarming as I have been paid to design this setup. Rack file ends up being 35mb in size. I wont be able to upload to support til tomorrow back at my studio with broad...
by bcslaam
Thu Jan 12, 2006 10:55 pm
Forum: Forte and EHCo
Topic: Cant Exclude Plugin from Preset changes
Replies: 19
Views: 7551

Cant Exclude Plugin from Preset changes

Hi I have just bought and setup Forte for a client. The rack I have made him is quite complex. Basically its and 8ch mixer with 8sends to 8busses using the new aux send plugin. This is all working very well except... 1. I have just purchased the Anwida GEQ31V plugin to go across four of the busses (...
by bcslaam
Mon Jan 09, 2006 10:59 pm
Forum: Forte and EHCo
Topic: can anyone recommend a really good MIDI controller keyboard?
Replies: 13
Views: 6319

yes there is. I bought a Fatar Studiologic VMK88 from music123 who accept international customers. pros- really small footprint (shallowest I've seen) heaps of sliders, knobs and buttons 4 foot inputs (this is rare as) comes with midi uno usb interface VERY light for travelling (the lightest to date...
by bcslaam
Mon Jan 09, 2006 9:06 pm
Forum: Forte and EHCo
Topic: Trying to find Audio input Fader plugin
Replies: 4
Views: 2198

by bcslaam
Mon Jan 09, 2006 12:30 pm
Forum: Forte and EHCo
Topic: Trying to find Audio input Fader plugin
Replies: 4
Views: 2198

Trying to find Audio input Fader plugin

Hi I searched for a fader plugin that can be midi controlled in forte but could find one. Does anyone know of a solution? One way I was thinking was to insert a channel strip. Is there any particular channel strip plugins with good quality for low cpu usage in live situations that someone can reccom...
by bcslaam
Mon Jan 02, 2006 8:08 pm
Forum: Forte and EHCo
Topic: Aux Busses available here
Replies: 18
Views: 9112

Hi Dirk Sorry, I've been flat tack..still am. The verions of msvcrt.dll were the same ie: 7.0.2600.2180. Both machines also had msvcrt20.ddd, msvcrt40.dll and the one that worked also had MSVCRT10.DLL in capitols. So before reluctantly installing net framework on the music machine I tried copying th...
by bcslaam
Thu Dec 29, 2005 12:53 am
Forum: Forte and EHCo
Topic: Aux Busses available here
Replies: 18
Views: 9112

Hi again Just to confirm. I installed .net framework 2 on my online test machine and the plugins appeared. Firstly thanks Dirk for bringing this functionality to forte. However, this concerns me, I dont want to have to load this microsoft crap on my music pcs/laptops. Please find a fix? Isn't .NET a...
by bcslaam
Thu Dec 29, 2005 12:11 am
Forum: Forte and EHCo
Topic: Aux Busses available here
Replies: 18
Views: 9112

by bcslaam
Sun Dec 18, 2005 9:09 am
Forum: Forte and EHCo
Topic: Forte doesn't see VSTi and loads a proxy instead.
Replies: 18
Views: 7373

Hi Mark I was just about to say the same thing! lol Thanks Brainspawn support for the generous offer of sorting my rack, but I opted to rebuild for more efficiency. Big task but worth it. Lucky I had a window of time to do it in. I still would encourage a workaround script or something more integrat...
by bcslaam
Tue Dec 06, 2005 11:51 am
Forum: Forte and EHCo
Topic: Forte doesn't see VSTi and loads a proxy instead.
Replies: 18
Views: 7373


Go to advanced search